Floor Machines

   

Advance Pacesetter™ Floor Machines

The Pacesetter™ 13/17/20 is a 1.0 hp, 175 rpm machine available in 13,17 and 20 inch sizes. Dual capacitors provide an extra burst of power to the machine when needed for start up or during operation, without overloading the electrical circuits in the facility. At 1.5 hp, 175 rpm, the Pacesetter™ HD is also available in 17 and 20 inch sizes. A triple-planetary gear design lasts longer than other gear drives because of they do not develop a wear pattern. A sealed gear box requires no maintenance. The Pacesetter™ 20SD™ a super duty 20 inch floor machine. For extreme duty, the 1.75 hp, 175 rpm machine also has the triple planetary gear design for longer wear. The Pacesetter™ 20TS is a two-speed floor machine with a 1.5 hp and a DC rectified motor. The two-speed machine runs at 180 and 320 rpm. Whether stripping, scrubbing, screening, or bonnet cleaning, this machine will fit your need. Heavy duty construction. All cast metal, chrome plated base. Dual start and run capacitors.

(Show more)

Nobles® FM-20-DS Dual Speed Floor Machine - 20" DS

Superior performance with low maintenance. With a dramatically-simplified design, and a heavy-duty 1.5 hp motor, this single speed floor machine requires little maintenance while delivering superior cleaning and maintenance results. Simple twist grip operation with safety lock to protect operators. This durable floor machine is a proven performer for polishing, scrubbing and stripping most any hard floor surface. Made from durable, corrosion-proof polyethylene. Motor: 1.5 hp, 12 A, 1100 watts, 120 V. Power Cord: 50', 14 gauge, 3-wire, SJT.

Nobles® Speedshine® Series Floor Machines

Choose from 17", 20", single or dual speed models to meet your needs. Warranty is 10 years on rotationally-molded construction and 3 years on parts and labor. Polish, scrub, strip and sand with the best backed floor machines in the industry. Proven performer for polishing, scrubbing, stripping or sanding most any hard floor type. Durable, corrosion-proof, polyethylene construction. Includes pad driver; 50 ft 14 gauge, 3 wire, SJT cord.

(Show more)

SSS® Cougar 17 Floor Machine - 17"

All purpose floor machine. For stripping, scrubbing, screen cleaning, or bonnet cleaning. Triple planetary high torque all-steel gear box. All metal construction. Universal clutch plate. Safety lock out switch. Motor mounted pad driver storage. Heavy duty 66-frame motor. Ergonomic handle. Easy-to-use controls. Fully adjustable handle. Non-marking bumpers. Power: 1.5 hp; Voltage: 110 volt. Speed: 175 rpm; Weight: 101 lbs. Power Cord: 55' safety orange; Amp draw: 13.0 amps.

SSS® Q-Line Floor Machine - 17"

Powered by capacitor start and capacitor run, 1.5 hp commercial motors for trouble-free operation. Excellent for stripping, scrubbing, spray buffing, bonnet buffing or sanding. Both units feature cast aluminum bases, triple planetary gears and safety orange power cords. 175 rpm. Pad driver included. Built for dependable service year after year. Time tested design. Handles multiple tasks in your facility. 175 rpm. 1.5 hp.

Tomcat EDGE® Floor Machines

Ideal for chemical free stripping of most floor finishes and is made in the USA. The "ST" model's super duty 1.5 hp motor runs at 1725 rpm, allowing it to operate quietly and without knocking up dust. The "HD" models heavy duty 1.5 hp motors runs at 3450, for increased productivity. Square corners allow it to work into corners that are missed by traditional "round" pads. Environmentally friendly "dry strip" approach is safer for the earth and operator by eliminating harsh chemicals and slippery conditions. Built to work "Wet" also, for traditional use. These surface preparation machines give operators the ability to remove multiple layers of finsih, without using chemicals. Handlebar: 12 gage steel, adjustable.

(Show more)

Tornado® BR Vario II Cylindrical Brush Floor Machine - 16"

Environmentally-preferred, compact, lightweight floor machine with 650 rpm of cleaning power. Cutting-edge cylindrical brush technology. Two counter rotating brushes; 2.4 gallon solution tank. Operating direction: 4-way; Power: 120V. Weight: 58 lbs.; Dimensions (w/o handle): 20" x 19" x 6.7".

Manufacturer #97607

Tornado® M Series Floor Machines

These machines have it all when it comes to heavy-duty applications including rolled steel bases with non-marking soft bumper guards, a triple planetary gear system, and cast aluminum Start Guard I handle for safety, added strength and operator comfort. Features our heavy-duty, dual-capacitor, 1.5 HP motor with a high torque configuration and low-amp draw for the ultimate in power. From daily polishing to heavy scrubbing or stripping, this machine has what it takes for the cleaning and maintenance professional. Power system: 115V; Brush Design/Type: Rotary Disc. Motor: 1.5 HP; Disc RPM: 175; Motor height: 16". Wheel type: 5" non-marking self lubricating.

(Show more)

Tornado® P Series Floor Machines

Built for years of trouble-free operation and long-lasting performance. Our patented, non-conductive one piece rotationally molded body is designed to absorb the torque and vibration normally felt when operating a floor machine. The one piece base and motor housing ensures that wires and capacitors are completely enclosed, enhancing the machine's durability, longevity and safety. These units are so ruggedly built, they out weigh most metal machines in the industry today. Has a triple planetary gear system and a 1.5 hp motor to handle the most demanding jobs. From daily polishing to heavy scrubbing or stripping this machine has what it takes for the cleaning and maintenance professional. 1.5 hp motor, 115V power system; 19.5" motor height. 175 rpm disc; 31" L x 20.5" W x 44.5" H.

(Show more)