Rider Scrubbers

   

Advance 2800 ST & 3400 ST Rider Scrubbers

The Advance 2800 ST and 3400 ST scrubbers deliver high performance results on a back-to-basics rider-scrubber platform. Manual control of the scrub deck and squeegee replace intricate electronics to keep operation simple without sacrificing performance. When your job calls for scrubbing large spaces at a lower total cost to clean, Advance's ST scrubbers are a smart choice. An open operator compartment allows cleaners to get on and off the machine from either side and provides clear sight lines to the floor. To start scrubbing, just manually lower the scrub deck and squeegee and press the foot pedal. Training is easy for operators of all experience levels, and minimal adjustments are required while using the machine. The calibrated low-solution-flow setting provides 85 minutes of run time on a single tank, for consistently clean results on moderately soiled floors. For high traffic areas, operators can increase the solution flow rate at the touch of a button and apply more down pressure, for more aggressive cleaning. The patented Safe ‘N Dry™ squeegee system uses a perforated squeegee to remove the collected water under the squeegee and allows for 100% water pick-up for safe, dry floors. Simplified mechanics and design make operation easy. Brush drive motor: 0.5 hp; Drive motor: 1.05 hp. Vacuum motor: 0.75 hp; CFM 66 @ 2" orifice. Sealed waterlift: 63" H2O, two pad holders.

(Show more)

Advance Advenger® Rider Scrubbers

Simple, yet intuitive controls allow operators to clean green, but have the flexibility to quickly increase cleaning performance with an increased detergent ratio, solution flow, and brush pressure. Available with EcoFlex™ system which is a flexible cleaning solution, from green to clean. Vacuum motor: 0.75 hp; CFM 66 @ 2" orifice.

(Show more)

Nobles® Speed Scrub™ Micro-Rider Scrubbers

Easy to learn, one button controls decrease the time spent training, and shifts it to more time spent cleaning. Choose either disk for smooth floors with out debris or cylindrical scrub heads for capturing light debris. Just scrubbed floors are immediately dry and safe for traffic and detergent is automatically mixed and measured precisely with optional FaST®. Also available with ec-H2O™. With ec-H2O™ option, you'll use 70% less water than conventional scrubbing methods. Detergent clean. Water safe. ec-H2O technology converts water into a powerful cleaning solution. 29 gallon solution and recovery tanks.

(Show more)

Tomcat® 250-13 Floor Scrubber - 26"

Gimbaled brush drive & 50% more scrubbing power. Designed to clean schools, malls, warehouses, hospitals, while standing up to contract cleaning. Tough, compact scrubber offers the productivity of riders with better maneuverability than walk-behinds. 54" L x 26" W x 55" H. (2) 0.75 HP motor power (standard). Solution/Recovery Tanks: 35 Gal./35 Gal.

Tomcat GTX Rider Scrubbers

These tough, compact scrubbers offer the productivity of riders with better maneuverability than walk-behinds. The three disk machines, with 26", 30", and 34" scrub paths, offer gimbaled brush drive and 50% more scrubbing power than competitive brands. The four cylindrical decks are ideal for grout lines, rubber floors and sweep debris while scrubbing. The scrub deck has curtains and wipers, for unmatched water control. The side shrouds are made of thick steel and remove easily for brush access and adjustments. Available with The "Edge" oscillating head allows customers to prep and recoat floor finish without any chemical strippers, when used with our unique PREP PAD. The Edge head cuts water consumption during normal scrubbing by 70% for further environmental sensitivity. Has the tip back tank which allows access to batteries, vacuum motors, and actuators. Brush Motor Power: (2) 0.75 hp.

(Show more)

Tomcat Model 290 & Model 350 Rider Scrubbers

With two specialized cleaning systems to choose from, Tomcats offers the performance and capacity required to clean your unique application. The "Cylindrical" machines, offer all the performance of disk scrubbers plus the ability to sweep. The cylindrical picks up wood chips, nails, broken glass, gravel, and metal chips. The debris is held in the slide-out hopper, which permits easy disposal. Designed to clean schools, malls, warehouses, retail outlets, while standing up to the daily rigors of contact cleaning. This tough, compact scrubber combines the productivity of riders with the maneuverability of walk-behinds. 396AH battery rating.

(Show more)

Tomcat XR Rider Scrubbers

The XR series rider floor scrubbers combine the productivity of rider floor scrubbers with the maneuverability of walk-behind floor scrubbers. Tomcats are designed to clean schools, malls, warehouses, retail outlets, while standing up to the daily rigors of contract cleaning. With two specialized cleaning systems to choose from, Tomcat rider floor scrubbers offer the performance and capacity required to clean your unique application. The two "Disk" machines, with 33" to 40" scrub paths, offer gimbaled brush drive and 35% more scrubbing power than competitive brands. The "Cylindrical" machines, offer all the performance of disk type rider scrubbers plus the ability to sweep the floor while scrubbing. The cylindrical scrub deck picks up wood chips, nails, broken glass, gravel, and metal chips. The debris is held in the convenient slide-out hopper, which permits easy disposal. The scrub decks include adjustable wipers and curtains, for unmatched water control. All components are made of heavy gauge steel. Motor Power: (2) 1.5 hp. (6) 325 AH batteries. Vacuum Power: 1.6 hp.

(Show more)

Tornado® BR 28/30, BD 26/30, BR/BD 33/30 Scrubbers

For effortless operation, Tornado's ride-on BR 28/30, BD 26/30 and BR/BD 33/30 units offer an automatic mode which will start all necessary operations of the scrubber once it is turned on. This system also gradually starts all of the motors and constantly controls the operation parameters to guarantee longer run-time and reliability. When in reverse, this machine also includes an automatic squeegee retraction feature. The environmentally preferred BR units offer the latest modern enhancement, cylindrical brush technology. The use of cylindrical brush technology delivers low moisture cleaning design and deep scrubbing through concentrated brush speeds of 1300 RPM, over six times higher than the speed of comparable rotary brush automatic scrubbers. To ensure worker safety, the machine includes a roll-bar for greater operator protection. Ergonomic handle and easy-to-read control panel displays. Solution/recovery tank: 30/32 gal. Battery voltage: 36.

(Show more)